圆杯—多边形杆复合挤压的上限研究

此文采用三次多项式表示的流线速度场和基元圆环技术相结合的混合流动模型对国杯—多边形截面杆型复合挤压进行了上限分析,得到挤压力的上限解,分析了杆部截面形状对复合挤压分流点位置及变形力的影响规律并对理论计算进行了实验验证.     

ASM1中废水和污泥组分浓度的测定方法研究

对呼吸计量法应用于校准ASM1作了简明的阐述。在呼吸速率与模型组分关系的基础上,介绍了ASM1中废水与污泥各组分浓度的测定方法,并指出模型组分细化的意义。     

楔横轧轴肩的成形曲面的设计

此文分析在二辊楔横轧中轧制各类轴肩的过程。在假想工件轴端固定的图上确定楔侧面截面轮廓形状,再通过叠加轴向刚性移动量确定各截面实际位置,比较直观简便地设计出轧制轴肩的辊面上的成形曲面。最后归纳了设计步骤。     

后扣板冷挤压工艺及模具

此文分析了产品成形的特点,模具承载的负荷特点,从而在成形工艺上、润滑上、模具结构及选材上采取了相应的措施.用H-4水基高分子润滑剂和3Cr2W8V制作冷挤压模都取得了明显效果.     

厚板双曲率模冲压过程的数值模拟与分析

使用有限元方法研究了在制造某特大型真空容器时厚板料的双曲率模冲压过程.对双曲率模冲压后板料的回弹规律进行了模拟,得出了不同的板宽和板厚对板料冲压后回弹量的影响规律,从而为确定冲模修正量的大小提供了依据.同时,也得出了厚板料双曲率模冲压的变形的发生和发展过程,从而为采取措施,避免方板冲压时的屈曲和起皱,使变形过程按照合理的路线进行提供了理论根据.所得结果具有普遍的规律.     

梯齿形桥梁伸缩缝U形弯曲件的成形技术

此文介绍一种新型桥梁伸缩缝关键零件U形弯曲件的成形技术.通过对该零件的变形分析和采用合理的工艺措施,使得这一成形难度较大的弯曲件一次压制获得成功.     

Effect of airborne SO_2 on performance of the turnip moth,Agrotis segetum Schiff

SO2 Pollution; rape plant (Brassica chinensis); turnip moth (Agrotis segetum); growth and developmental parameters.     

温压工艺中聚合物添加剂的加入方式

采用温压技术制备铁基粉末冶金材料,研究了干混和湿混两种聚合物添加剂加入方式及压制温度对生坯和烧结体性能的影响,并对其作用机理进行了探讨.试验结果表明,干混混合粉生坯及烧结体的性能略高于湿混混合粉生坯及烧结体的性能,但前者的最佳压制温度范围略高.     

布、洛、维、肖氏硬度的相关关系

进行了布、洛、维、肖氏硬度之间的回归分析,建立了洛氏硬度与布氏、维氏、肖氏硬度之间,以及布氏硬度与维氏、肖氏硬度之间的回归关系式.     

Effects of fluoride on growth and reproduction of the army worm, Mythimna separata (Walker)

This paper deals with effects of airborne fluorine on the army worm, Mythimna separata (Walker), by rearing the larvae on the wheat foliage exposed to HF or fumigating the larvae on the artificial diet with the pollutant. Larval relative growth rate (GR) and index of population trend of the insect reduced by 5% and 11%, respectively, when the larvae were reared on the foliage taken from the wheat plants exposed to 0.87 g·dm-2·day-1 of fluorine compared with those of the control. An extra instar appeared in a majority of the larvae treated. Survival rate and GR of the larvae on the wheat plant being exposure to the same concentration of fluorine in field open-top fumigation device were 40% and 15% lower than that of the control, respectively. Similar experiment with the insect on the artificial diet also showed that direct impact of the pollutant on the army worm was greater than its indirect effect via their host plant.